Energy performance is decided long before the insulation goes in. Here is how we manage a build, and what each part of an energy-efficient home means in plain terms.
Last reviewed November 2026
Zaboss Concepts is a design-build firm. We partner with independent architects on the design, then manage the construction directly, from the first drawing to the final walkthrough. Construction is carried out by a carefully vetted network of trade professionals, and we oversee every trade, schedule, and quality check along the way.
That matters for energy performance because a tight, efficient home is built by many trades working in the right order. The framers, the window installers, the insulators, the electricians, and the heating and cooling contractors all affect how the house performs. When one team coordinates all of them, details that sit between trades get handled instead of falling through the gaps.
A house loses a surprising amount of heat through small gaps. Air leaks around windows and doors, at the places where pipes and wires pass through walls, along the top of the foundation wall, and up into the attic. Air sealing is the work of closing those gaps, so the heated or cooled air you pay for stays inside.
Air sealing is easiest and most effective when it is planned before the walls are closed up. After the drywall goes on, most of the gaps are hidden and hard to reach. That is why we treat it as part of how the trades are sequenced, not as something to fix at the end.
A well-sealed house also tends to be more comfortable. There are fewer drafts, fewer cold spots near exterior walls, and less dust and outdoor noise coming in through gaps.
A blower door test measures how leaky a house is. A calibrated fan is fitted into an exterior door opening and used to pull the house to a set pressure, and the test records how much air it takes to hold that pressure. The tighter the house, the less air the fan has to move.
In Washington, this test is part of the energy code, not an extra. Under the 2021 Washington State Energy Code for residential buildings, a new dwelling must be tested, and the result may not exceed 4.0 air changes per hour at 50 pascals, usually written as 4.0 ACH50. The test is run at that pressure with a blower door, following a recognized testing standard.
We offer blower door testing on our homes, and we build our Washington homes to this code. Homes in Oregon follow the Oregon Residential Specialty Code, which has its own requirements. We do not publish test results on this page, and we do not imply that any home performed a certain way without the test report to show it.
A tighter house needs a planned way to bring in fresh air. If a house is sealed well and has no ventilation plan, stale air, moisture, and indoor pollutants have nowhere to go. That is why building codes address ventilation in new homes, and why we offer mechanical ventilation.
An HRV, or heat recovery ventilator, is one common way to do it. It brings fresh outdoor air in and sends stale indoor air out, and it passes the heat from the outgoing air to the incoming air on the way. That means the house gets fresh air without throwing away as much of the heat it has paid to create.
An HRV is one of several ventilation options. Which system fits a home depends on its size, its layout, and its heating system, and we decide that with the owner and the mechanical contractor, not as a fixed package.
Washington's residential energy code is built around a menu of options. In addition to the baseline requirements, each new home has to earn a minimum number of credits by choosing efficiency measures from a list in Section R406 of the code. The options include things like how airtight the house is, the ventilation system, the heating and cooling equipment, the water heating, and the performance of the windows and envelope.
The 2021 edition of the Washington State Energy Code for residential buildings took effect on March 15, 2024. A newer edition is planned to follow. Because the effective dates have moved before, always confirm the current edition with the local building department before you plan around it.
Our job is to help the owner and the design team choose a combination of credits that fits the home, the budget, and how the family wants to live. Different homes will reach compliance in different ways, and there is no single package that suits every lot.
The code sets a minimum. Choices that go beyond it, such as a tighter air-leakage result, higher-performance windows, or upgraded heating and ventilation equipment, are optional and are decided with the owner for each project. They affect cost, so we talk through what each one buys before it goes into the plans.
If energy performance matters to you, tell us early. The best time to decide is before the design is final, when changes cost little and every trade can plan around them.
Code details change, so confirm current requirements with your local building department. Sources: Washington State Building Code Council; Washington State University Energy Program, residential energy code resources.